• page_banner

Products

Brightness sensor HD-S107

Short Description:

Hd-S107 is a brightness sensor, connected to the LED display control system, so that the LED display brightness changes with the ambient brightness.


Product Detail

Product specification

Brightness sensor

HD-S107

V3.0 20210703

HD-S107 is a brightness sensor, which is connected to the LED display control system, so that the brightness of the LED display changes with the brightness of the surrounding environment.

Technical Parameters

parameter list

Working temperature

-25~85℃

Brightness range

1%~100%

Sensitivity-high\medium\low

Get data once in 5s\10s\15s

Standard wiring length

1500mm

Light Sensor Probe

dgx (5)

Connection Cable

dgx (4)

Size

dgx (2)

Installation Diagram

dgx (1)

Installation Notes:

1.Remove the washer, nut and connecting wire from S107;

2.Before installing the waterproof rubber gasket, put the light sensor probe into the fixed installation hole opened in the box, and screw the rubber ring and nut in turn;

3.Install the connecting line: connect the one end of the wiring with aviation head XS10JK-4P/Y female connector and the aviation connector XS10JK-4P/Y- male connector on S107 (note: the interface has a foolproof bayonet design, please align it and insert it);

4.Connect the other end of the cable to the sensor of the playback box or control card to connect it correctly.


  • Previous:
  • Next:

  • Write your message here and send it to us